Receive a $125 Gift Card With your Plug-N-Fire Kiln!
Ships for $99 Anywhere in Canada!
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller
- 8" Square x 9" High (0.33 cu ft)
- This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
- Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
- Kiln plugs into a separate control panel with power and thermocouple wire jack
- Door safety switch shuts off power to the elements when the door is opened
- Hard ceramic element channels
- Includes one 7" by 7" by 3/8" shelf and three 4" posts
-
C-ETL-us Listed to UL499 and Canadian Standards
-
Insulation:
2-1/2" K23 Firebrick & 1" 1900 Back-Up Insulation on sides, 3" K23 Firebrick on top & bottom
-
Sections:
One section
-
Inside Dimensions:
8.00" Wide x 8.00" Deep x 9.00"High (20.32 cm Wide x 20.32 cm Deep x 22.86 cm High)
-
Outside Dimensions:
16.00" Wide x 19.00" Deep x 20.00" High (40.64 cm Wide x 48.26 cm Deep x 50.8 cm High)
-
Weight:
77 lbs (35 kg)
- Additional Information
- Amps: 12.5
- Wire Connection: 5-15P Plug (15 amp, 120 volt)
- Wire Gauge for Connection: 14 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
-
C-ETL-us Listed to UL499 and Canadian Standards
Shipping information:
-
Kiln:
(2 boxes 50 lbs each) 22" x 24" x 41cm High (Each56cm x 61cm x 16" High)
-
Ship Weight:
95 lbs (43 kg)
-
Kiln with Furniture Kit:
(2 boxes 50 lbs each) 22" x 24" x 41cm High (Each) ( 56cm x 61cm x 16" High )
-
Ship Weight:
100 lbs (45 kg)
-
Packaging:
Packaged for UPS or FedEx
New orders currently have an estimated lead time of 10–14 weeks. As with any custom-built equipment, occasional delays can occur. While these are sometimes beyond our control, we’re committed to keeping you informed every step of the way and will do our best to communicate any updates as they arise.
Is this your first kiln? No worries! You will have an opportunity to sit down with the owner for a kiln programming session 1:1 in person or remotely!
Our top 8 questions to ask yourself before buying a kiln:
Receive a $125 Gift Card With your Plug-N-Fire Kiln!
Ships for $99 Anywhere in Canada!
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller
- 8" Square x 9" High (0.33 cu ft)
- This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
- Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
- Kiln plugs into a separate control panel with power and thermocouple wire jack
- Door safety switch shuts off power to the elements when the door is opened
- Hard ceramic element channels
- Includes one 7" by 7" by 3/8" shelf and three 4" posts
-
C-ETL-us Listed to UL499 and Canadian Standards
-
Insulation:
2-1/2" K23 Firebrick & 1" 1900 Back-Up Insulation on sides, 3" K23 Firebrick on top & bottom
-
Sections:
One section
-
Inside Dimensions:
8.00" Wide x 8.00" Deep x 9.00"High (20.32 cm Wide x 20.32 cm Deep x 22.86 cm High)
-
Outside Dimensions:
16.00" Wide x 19.00" Deep x 20.00" High (40.64 cm Wide x 48.26 cm Deep x 50.8 cm High)
-
Weight:
77 lbs (35 kg)
- Additional Information
- Amps: 12.5
- Wire Connection: 5-15P Plug (15 amp, 120 volt)
- Wire Gauge for Connection: 14 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
-
C-ETL-us Listed to UL499 and Canadian Standards
Shipping information:
-
Kiln:
(2 boxes 50 lbs each) 22" x 24" x 41cm High (Each56cm x 61cm x 16" High)
-
Ship Weight:
95 lbs (43 kg)
-
Kiln with Furniture Kit:
(2 boxes 50 lbs each) 22" x 24" x 41cm High (Each) ( 56cm x 61cm x 16" High )
-
Ship Weight:
100 lbs (45 kg)
-
Packaging:
Packaged for UPS or FedEx
New orders currently have an estimated lead time of 10–14 weeks. As with any custom-built equipment, occasional delays can occur. While these are sometimes beyond our control, we’re committed to keeping you informed every step of the way and will do our best to communicate any updates as they arise.
Is this your first kiln? No worries! You will have an opportunity to sit down with the owner for a kiln programming session 1:1 in person or remotely!
Our top 8 questions to ask yourself before buying a kiln: